Powerlift® Mangets

The compact, yet powerful, Rare Earth Powerlift permanent lift magnets can be used on flat or round surfaces and contain an internal release On/Off device that does not contact or damage the surface. Permanent magnetic lifts eliminate the fear of dropping the load being lifted due to power failures.

  • On/Off Rare Earth Permanent Magnet
  • Handle lock in both On and Off position
  • Lifts flat or round loads
  • Easy internal manual release does not contact the load
  • RFID Enables
  • Heat resistant up to 180ºF (82ºC)
  • 3:1 Design Factor

Conforms to ASME B30.20 Standards


Model No.Lift (LBS)Lift (KGS)Overall Height (IN)Overall Length (IN)Magnet Height (IN)Magnet Width (IN)Magnet Length (IN)Handle LN (IN)Bail Thickness (IN)Bail Height (IN)Bail Width (IN)Weight (LBS)

Lifting Value in lbs (kg) & *Max sheet length due to sag for material thickness for single magnet use

Model No.1/4" (6' long)3/8" (8' long)1/2" (8' long)3/4" (8' long)1" (10' long)2" (10' long)3" (10' long)
PNL0250180 (81)250 (113)250 (113)250 (113)250 (113)250 (113)250 (113)
PNL0800270 (122)500 (226)615 (279)800 (363)800 (363)800 (363)800 (363)
PNL1600NACF800 (362)1600 (726)1600 (726)1600 (726)1600 (726)
PNL2500NANACFCF1490 (675)2500 (1134)2500 (1134)
PNL5000NANANANACF2625 (1190)5000 (2268)
PNL6600NANANANANANA6600 (2993)

Round Lifting Applications:

Model No.Lift - lbs (kg)Min. Diameter (in)Min. Th. (in)
PNL0250125 (57)21/2
PNL0800400 (181)31/2
PNL1600800 (363)41
PNL25001250 (567)52
PNL50002500 (1134)144
PNL66003300 (1496)CFCF

NOTE: Lifting Values for the PowerLift® Magnets are stated at 33% of the actual value. We recommend when lifting sheets over 8’, use 2 or more lifts on a spreader bar to prevent sheet flexing, sagging or peel-off. Thin material is susceptible to magnetic bleed through, resulting in two sheets being lifted at once. Round Item Lifting Values are based on ideal conditions. Pipe length, wall thickness, diameter and surface condition can all affect the magnet’s performance. Please consult the factory before specifying these magnets for use on round materials. *These maximum sheet lengths are selected due to the sag characteristics of the specifi ed sheet. The item to be lifted must cover the entire length and width of the magnetic poles to properly engage and release the part. CF = Consult Factory NA = Not Applicable (Magnets listed will not turn “ON” on specifi ed material thicknesses.)

Scroll to Top