CM Long Reach Shackle

As one of the only manufacturers of long-reach shackles, CM designed these shackles for use in construction applications where a longer reach is needed to attach to pick points.

Design factor of 5:1
Meets the requirements of ASME B30.26
Alloy Steel
WLL forged on body
Offered in self-colored or durable orange powder coated finish
Do not point load. The load should be evenly distributed over the entire pin to achieve full working load limit.
Do not side load long-reach shackles.
80% of bolt/pin must be covered to obtain full working load limit.

WLL: 7,000 to 50,000 lbs.

CM Shackles Use, Care & Inspection>>

Warnings:
Refer to the Manufacturer Warnings and Instructions before attempting to use any product. CM Note: Only anchor shackles should be side loaded. Chain or “D” shape shackles should not be side loaded.
CM Shackles Use, Care & Inspection>>
Product Warnings>>

Specifications

Specifications

Size (in)	Working Load Limit	Screw Pin Product Code: Self-Colored	Screw Pin Product Code: Painted	Screw Pin: Weight (lbs)	Bolt, Nut & Cutter Product Code: Self-Colored	Bolt, Nut & Cutter Product Code: Painted	Bolt, Nut & Cutter: Weight (lbs)	Dimensions (in): P	Dimensions (in): D	Dimensions (in): L	Dimensions (in): W	Dimensions (in): G
5/8	7,000	M7151	M7151P	1.80	M9151	M9151P	1.95	0.75	0.63	4.00	2.25	1.57
3/4	10,000	M7152	M7152P	2.72	M9152	M9152P	3.21	0.88	0.75	5.00	2.75	1.81
1	19,000	M7154	M7154P	5.86	M9154	M9154P	6.31	1.00	1.00	5.50	3.25	2.38
1-1/4	28,000	M7156	M7156P	11.90	M9156	M9156P	12.90	1.38	1.25	6.19	3.88	3.06
1-1/2	34,000	M7157	M7157P	19.60	M9157	M9157P	20.70	1.50	1.50	7.00	4.50	3.50
1-3/4	50,000	M7177	M7177P	30.70	M9177	M9177P	33.30	2.00	1.75	8.00	5.25	4.00