Ashley Sling,alloy chain slings
home About Ashley Sling alloy chain sling inspection Contact Site Map
ALLOY CHAIN SLINGS, WIRE ROPE SLINGS , RIGGING
HARDWARE, FALL PROTECTION, HOISTS and more . . .
arrow
 Alloy Chain Slings
arrow Grab IQ Alloy Chain Slings
arrow Wire Rope Slings
arrow Nylon Web Slings
arrow Polyester Round Slings
arrow High Performance Round Slings
arrow Wire Mesh Slings
arrow TUFF-ASH ® Sling Protection Products
arrow Linton Magnetic Sling Protectors
arrow Crosby Rigging Hardware
arrow Wire Rope
arrow Samson Synthetic Rope
arrow Hoists
arrow Fall Protection
arrow Fall Protection for Tools
arrow Netting Systems
arrow Tie Down Equipment
arrow Plate Clamps
arrow Lifting Beams
arrow Load Testing Equipment
arrow Lifting Magnets
arrow Training Seminars
arrow OSHA Regulations & Guidelines
arrow Klein Iron Workers Tools
arrow Safety Products

FALL PROTECTION
<Back Next>
GRILLON Adjustable Lanyards for Work Positioning

GRILLON  
CLICK FOR DETAILS
. . .

GRILLON HOOK   
CLICK FOR DETAILS . . .

GRILLON HOOK   
CLICK FOR DETAILS . . .


Lanyard Termination

• Lanyard with fine adjustment system for precise work positioning
• Can be used in two ways:
- double mode, on the lateral attachment points of the harness,
   to distribute the weight on the belt (user has weight on his feet):
   length is adjusted by pressing on the pivoting cam)
- single mode, on the harness ventral attachment point,
  to distribute weight between the waistbelt and the leg loops
  (user is suspended): length is adjusted by operating the handle
   while holding the free end of the lanyard
• Removable protective sheath protects the rope from abrasive
   surfaces and allows smooth rope glide.
The protection can be removed when the single lanyard technique is used, to bring the user closer to the anchor.

• Available in several lengths:
- GRILLON (L52A 002): 2 m, 435 g
- GRILLON (L52A 003): 3 m, 515 g
- GRILLON (L52A 004): 4 m, 595 g
- GRILLON (L52A 005): 5 m, 675 g

• Certification(s): CE EN 358

   
Lanyard Termination
Usage: Single

When the anchor is located above the user, the GRILLON lanyard is connected to the harness ventral attachment point, so that the load is comfortably distributed between the belt and leg loops. The user adjusts his position by operating the handle, while holding the free end of the lanyard.
laynard grillon
Usage: Double

The GRILLON lanyard can be used in double mode (on the harness lateral attachment points) when the user must work with a supporting surface for the feet. This type of attachment gives better load distribution on the belt. The user precisely adjusts his position by pressing on the lanyard's pivoting cam.



  spacer