Ashley Sling,alloy chain slings
home About Ashley Sling alloy chain sling inspection Contact Site Map
ALLOY CHAIN SLINGS, WIRE ROPE SLINGS , RIGGING
HARDWARE, FALL PROTECTION, HOISTS and more . . .
arrow
 Alloy Chain Slings
arrow Grab IQ Alloy Chain Slings
arrow Wire Rope Slings
arrow Nylon Web Slings
arrow Polyester Round Slings
arrow High Performance Round Slings
arrow Wire Mesh Slings
arrow TUFF-ASH ® Sling Protection Products
arrow Linton Magnetic Sling Protectors
arrow Crosby Rigging Hardware
arrow Wire Rope
arrow Samson Synthetic Rope
arrow Hoists
arrow Fall Protection
arrow Fall Protection for Tools
arrow Netting Systems
arrow Tie Down Equipment
arrow Plate Clamps
arrow Lifting Beams
arrow Load Testing Equipment
arrow Lifting Magnets
arrow Training Seminars
arrow OSHA Regulations & Guidelines
arrow Klein Iron Workers Tools
arrow Safety Products

FALL PROTECTION
<Back Next>
GRILLON HOOK Adjustable Work Lanyards with Hook Connector

GRILLON  
CLICK FOR DETAILS
. . .

GRILLON HOOK   
CLICK FOR DETAILS . . .

GRILLON HOOK   
CLICK FOR DETAILS . . .

 

Lanyard Termination GRILLON HOOK
Adjustable work positioning lanyard with HOOK connector
  • Lanyard with fine adjustment system for precise work positioning
  • Used in double mode, on the harness lateral attachment points, to distribute the weight on
    the belt (user has weight on his feet): length is
    adjusted by pressing on the pivoting cam
  • May be used in single mode, on the harness
    ventral attachment point, to distribute weight
    between the waistbelt and the leg loops (user is
    suspended): length is adjusted by operating the
    handle while holding the free end of the lanyard
    Removable protective sheath protects the rope from abrasive contact and favors smooth rope glide. The protection can be removed when the single lanyard technique is used, to bring the user closer to the anchor
  • Available in several lengths:
    - GRILLON (L52H 002): 2 m, 625
    - GRILLON (L52H 003): 3 m, 735 g
    - GRILLON (L52H 004): 4 m, 815 g
    - GRILLON (L52H 005): 5 m, 895 g
  • Certification(s): CE EN 358
   
Lanyard Termination
Usage: Single

When the anchor is located above the user, the GRILLON lanyard is connected to the harness ventral attachment point, so that the load is comfortably distributed between the belt and leg loops. The user adjusts his position by operating the handle, while holding the free end of the lanyard.
laynard grillon
Usage: Double

The GRILLON lanyard can be used in double mode (on the harness lateral attachment points) when the user must work with a supporting surface for the feet. This type of attachment gives better load distribution on the belt. The user precisely adjusts his position by pressing on the lanyard's pivoting cam.


 


  spacer